Jump to content

Mk3 Mahem

Advanced Member
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Mk3 Mahem

  1. Strange how they reversed the connectors orientation on them. Mine is the top one but has about a foot of cable between connectors and switch so different mod again?
  2. Hi Rich, I have this facelift (stamped 75) which I bought as a spare a while ago. Must admit I didnt pay attention to the wiring differences to my pre facelift one. I can now see how much shorter the cable is and different connections but as you say they can be re soldered. It appears to click and spring back correctly but cant meter it out as I dont know which wires do and should connect if correct. If no one else has a pre facelift version and if interested pm me. Pete
  3. It's now gone-Good home found.
  4. Hi all, i dont need this and cant be bothered to try and sell it so first person who pm's me I will stick in a4 envelope (uk only)and post to them for free. Hopefully someone can use.
  5. RT -Thanks for that. You learn something new all the time! Sw can you pm me price and condition please ? Thanks all
  6. Well iv measured the pipes on the matrix ( I dont know if it is the correct one but looks good condition) and looking from above distance is approx 156 mill 6/12 inches between pipe centres but I think the panel had been modified by others as in the holes were further apart originally but one hole had been modified (ripped down) to allow for this closer together matrix pipes. So basically either would probably do as I will make fit but neater than the original one!
  7. Thanks for looking.
  8. Hi, has any got a spare heater plate for the mk3. The one with the two holes where you connect the heater matrix through?. Maybe the same as mk4 and 5? Thanks
  9. I think it's the same just at a slight different angle of photo. But as I said matrix hose may foul with your right hand rocker cover?. Someone on here may have one for sale? But also someone may be able to confirm about it fitting or need different heater box? Shame you not closer and restrictions about or you could of trial fitted
  10. Mines pre facelift 3 and I got this mk5 to replace broken fiberglass early one.allthough not fitted yet I believe as above all the same . I'm assuming yours is an oz spec one then? So I think same rhd panel etc. But looking at your old heater I think it is slimmer different version where the matrix is . I asume this is to allow more room for the v6 as maybe the hoses would foul larger your engine on our bigger heater box? Maybe someone else can clarify this as I have no experience fitting of v6 s in these. Here is my panel to compare.
  11. Tony is that mk3 as I'm not sure and heater doesn't look familiar. But here is my mk3/4/5 version and shows spigot where that connects to to operate flap. Last pic is as in car
  12. Mk3 Mahem

    mk3-5 bits

    Hi .I'll take the cam cover thanks. PM you. Maybe auto pedal too pm'd
  13. Mk3 Mahem

    mk3-5 bits

    Hi .I'll take the cam cover thanks. PM you.
  14. Excellent ! that's the one Craig. i'll take it. Will pm you. Thanks Pete
  15. Hi all, looking for a dash switch as above as mine has broken internally. It's the small one with two flat blade connectors, only need back as have button still. Anyone got a scruffy spare one? Ta.
  16. Hi, i am after the roof rain gutters if any good if no one after the roof complete? Also the rear arch trim / trims can collect as not too far. Let me know condition thanks. Pete
  17. I managed to fit these stainless Capri one's, sorry cant remember if i had to open up hole a bit or if they went straight in. https://www.tickover.co.uk/shop/contents/en-uk/d334.html
  18. Happy new year! Are these any good to you? -i think they are facelift versions.
  19. Hi Craig, has this got the lid /top? Pete
  20. Hi mark, are the rear arch trims available? Pete
  21. Two grilles and some lights on flea bay-all in one day! http://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5574629005&toolid=10001&campid=5335900709&customid=&mpre=http://www.ebay.co.uk/itm/CORTINA-MK-3-GRILL-/172677948059?hash=item283468629b:g:kcAAAOSwKytZGyOK http://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5574629005&toolid=10001&campid=5335900709&customid=&mpre=http://www.ebay.co.uk/itm/CORTINA-MK-3-GXL-HEADLAMP-PANELS-/172677957003?hash=item283468858b:g:zbkAAOSwPh5ZGy0N http://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5574629005&toolid=10001&campid=5335900709&customid=&mpre=http://www.ebay.co.uk/itm/CORTINA-MK-3-GXL-GRILL-IN-GREAT-ORDER-/172677933808?hash=item2834682af0:g:wDAAAOSwi7RZGx94 Fill ya boots!
  22. Mk3 Mahem

    Mk3 doors

    Hi, I have a couple of them at the mo but one is due to go onto mine (to replace rotten third one with no bottom of door)- ill have a look in shed tomorrow to see condition of spare
  23. Hi all- looking for the fir tree type clips (18mm diameter with top hat) that hold rear the shelf down,the old trim clips shattered when being removed.Has anyone got a pair of these spare preferably blue or black or know of a modern alternative ?? Thanks
  24. Hi all, any one have a new /nearly new auto pedal rubber in their spares as i cant seem to get one in the correct shape (i need the longer at top and rounded edges at bottom). or know where i can get one? i know it might be too much to ask if they have chrome trim as well???? pm me if so Thanks
  • Create New...