Woodley cortinaman

That's brilliant, thank you Pete-H

Hi all, I've at to remove the igniton switch fault finding. Before I removed the switch I numbered all the wires and numbered the terminals, plus done a diagram. Well, it turned out the permanent marker I used to number the terminals wasn't so permanent, they have all rubbed off. On removal of the switch I noticed that there are numbered stamped on the card around the terminals. So, can anyone tell me witch wire goes to what terminal please. Thank you

Hi all, my n/s/r I has rusted through so if a ages to get a replacement which I've prepped and sprayed in the correct colour, Anchor Blue. Anyway, the old door seal was rotten, so I purchased a complete set of 4 door seals. Unfortunately the seals didn't come with clips to fit the seal to the door. So, I've brought some seal clips that fit the holes in the door. I've found the door seals from a Mondeo fits perfectly. Then, I drilled holes in the correct places and used a tube of 'work'. It's a sealant and a adhesive too. It's clear which helps. I filled the drilled holes with the 'Worx' and then pushed the clips into the holes. I let the suff dry for a few days and now I've fitted door seal and the clips have stayed put. I'm going to try and fit the door the weekend. Happy days :rolleyes: :rolleyes:

Sorry......Yes a Deluxe :rolleyes:

Thanks all, my car has got the longer gearstick and it has no fuse box so I take it it's a series 1 many thanks for your help.

Thank you so much for your effort in scanning the manual. It will come in very handy :thumbup: :thumbup:

Hi guys, is there a way of tell img if my mk2 Cortina is a series 1 or series 2. It was built in September 1968. I've translated my vin plate details but it still doesn't give me the series number.

Thanks Mk2 Addict, I'll give it a go the weekend. Cheers

Morning all, Can anyone please tell me the best way to remove my MK2 N/S/R door. It's passed its best and I have a replacement painted and ready to fit. Thanks, Brian

Hi mate I need 3 of them.

Hi all, I've recently had my door handles re-chromed and the guy who done them has lost the screws that go in the back of the door buttons that opens the door. Can someone please tell me the size of these screws so I can get some replacements. Many thanks Brian

Hi Tony, thanks, I do already have a in-line one but I want to make the car as original has possible.

Hi all, can anyone please give me the dimensions of the fuel filter element that fits into the glass bowl fuel pump. I need a fuel element as my car hasn't got one, a supplier sad he might be able to get one for me but he needs to know the size. Many thanks

Hi all, I've been ask by my father in law to sale these mirror for him. On the rear of the mirror is stamped Wingard Villietta any ideas please? They are in good condition.

Hi, have you got any seat covers for a mk2 series 1 deluxe please. The pattern runs from front to back. I'm after front seat covers. Many thanks Brian

Hi all, I'm after a drivers seat cover for my deluxe in black. The deluxe one is where the stripe runs from front to back.. Thanks

Morning all, I've had a bit of play whilst driving, so while the front of the car is in the air after sorting out the front brakes, I thought I would crack on and sort out the steering. So, with the front of the car of the ground I turned the steering wheel both ways, only to find that it stiff and creaking through the middle of the steering but fine with the steering on either lock. I've removed the idler arm but still have the same fault. Does anyone have any ideas??? I'm going to remove the arm off the steering box today and see if the fault is still there. thanks.

Hi Craig, thanks for the offer, I might just well take you up on that. Cheers Brian

Reading in Berkshire.

Hi mk1madness, the colour is Anchor blue, I'm planning on keeping the car so I would like to have a proper job done. The inner arches are not to bad but does need slight attention.

Hi all, I need to get my rear arches replaced, the arches came with the sale of the car, these http://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5574629005&toolid=10001&campid=5335900709&customid=&mpre=http://www.ebay.co.uk/itm/CORTINA-MK2-66-70-REAR-WHEELARCH-2-4-DOOR-L-H-NEW-/221538131253?pt=LH_DefaultDomain_3&hash=item3394b39d35 So how much do you think I should be paying to have them replaced and both rear quarter panels re spayed in Anchor Blue. Thanks

I've found this http://www.paragonpaints.co.uk/RAL-5026-Pearl-Night-Blue.html do you think this is close to Anchor Blue???

Hi all, I want to paint parts of my cortina mk2 in enamel. The colour of my car is Anchor Blue, code CW does anyone know what the RAL code is for this colour as I can't get the enamel colour made until I have the RAL code. Thanks

Hi all, can someone please tell me where the location of the engine number is? I've tried looking for it but can't find it? Thanks.

Thanks MLI for the information, most helpful. I