deltamal
-
Content Count
1,578 -
Joined
-
Last visited
-
Days Won
12
Everything posted by deltamal
-
Iv'e not had mine done as yet, I devoloped a trapped sciatic nerve at the start of December, operation on my spine to release it 3 weeks ago and now getting back to normal (as it get's!) I plan to sort it in a month or so
-
Easysteer make a part exchange kit for Mk 345, around £500 ish,
-
I'm fitting power steering to my 82 Crusader estate, i am missing one item to finish it, it is the connection from the power rack to the steering arm, just the cast clamp that fits on to the rack would bo ok as I cam modify the rest to suit, the o/d of the spline that it fits on to is 17.5mm,
-
I'm looking to get a pair of Atlas heavy duty half shafts as fitted to the Mk4 estates - 18 tooth spline 30mm diameter (group one?) Quaif can supply them to a custom length, what I need to know is do all theese axles have the same wheel bearing position and diameter etc,
-
I just think they dont want to give free tax and trying to get old cars orr the road!
-
Would this be a download form? I checked the first reg date again and it's 27/5/82 so it will be 41 years old thin May, should qualify I guess.....
-
Help! my Crusader estate is now 41 years old first registered 1/1/82 so should qualify for a tax free status, the .Gov sites that I have looked at say take your reminder and reg form V11 to the post office and they will send it off for status change, not now apparantly according to PO counter staff! not sure what to do now!
-
Rally design would be worth a try, I got some there for my mk3 and Mk5.
-
Thanks for looking, they seem to be a bit rare, get scrapped I guess.
-
Thank you for the pic! would it be a spare one for sale?
-
Would I be right in thinking that Cortina Mk4 and Capri half shafts are different lengths? Iv'e got an offer of some but the seller is not sure which model they came from, and I can't find info on Cortina half shaft lengths......
-
Hi Craig, any luck with finding a half-shaft for an 18 spline Atlas axle? it doesent have to be a usable one as its just a pattern to get a pair made...
-
I'm after an 18 tooth spline half shaft for a Mk4 /5 Cortina Atlas axle, condition is not important as long as it is intact as I need one to use as a pattern to get some new ones made, any out there?!
-
Hi Craig, I need to know the the overall length of one of the 2.0 half shafts 18 tooth spline from the the end to end of the splines, so I can be sure that its the right ones, so I thought if I could get a half shaft to send the supplier it would confirm it so I don't get escort or capri ones!
-
Would you happen to have a pair or one of the 2.0/2.3 shafts that could be used as a pattern?
-
Hi craig,
Would you happen to have a pair of half shafts to fit a a Mk3 or 4? the condition is not important as I need them as a pattern to get some new ones made, mine have the 18 tooth spline, one would be ok...
cheer's Malcolm.
-
I thought it might be! thank you for your reply
-
-
Info required please! what is the length of a Mk4 half shaft, is it the same as a Capri? @ 73 cms.....Im looking for a new replacement for mine as they are a bit worn!
-
Mines hot and free! guess I need a new one thanks Craig.
-
I'm looking for info regarding the viscus fan fitted to my 2.0 Crusader estate, when the engine is hot should the fan spin freely or logically should it be stiff to turn? not sure if mine's working or not!
-
I'm looking for 2 of the spring clips for a face lift Mk3 - square headlight, its the ones that clip on to the back of the reflector and hold the bulb assembly in place, I have one broken and one lost! they are held in place with garden wite at the moment, not ideal! any out there please?
-
Good pic! shame about the old geezer in the foreground though! I think he might own the Carnival red Mk3! it was an excellent journey much enjoyed by my brother and myself.
-
Help to find discs please, I,m running spaced Princess 4 pot calipers with Capri vented discs which are warped, the discs are 257mm diameter the standard ones are 245mm so they would be too small to cover the pads, does anybody know where to get the 257 ones?
