Jump to content

mk2sav

Advanced Member
  • Content Count

    681
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by mk2sav

  1. Hi Martin - did you get some ? Steve.
  2. Hi mate - just found the one I had left - new in its packet if you still need one . Steve.
  3. mk2sav

    mk2sav

  4. mk2sav

    Mk2 door hinges

    no mate - sorry but the top fronts are only top fronts . backs are very different at the top - bottom ones will fit front or back doors .
  5. Thanks or checking mate - thought your foreign cars might have been laminated as lots of countries insisted on spec . Steve
  6. Hi Kev- you have reminded me - you were going to check if you had a good mk2 laminated screen - did you check lease - cheers-Steve.
  7. Hi Terry - don't think you will find one - the perfectly round knob didn't come with a pattern as far as I know but i can always be proved wrong - Steve.
  8. Hi Toe - have one here if you cant find one closer as I'm in Devon . Steve.
  9. Hi Pieter - sorry to tell you but that system is not used on English cars - it is as far as I know , only fitted to some export markets . The only help I can offer is that the valve with a 3004e part number is a Corsair v4 number . Steve.
  10. As far as I can make out , this should have the same 3 bolt fixing , 10 tooth starter as lots of earlier Fords , Lucas no 25148 or LRS100 , and if it is , I had a service exchange one listed on e-bay but got no bids at £20 - post would be about £8 on top if any good to you . Steve.
  11. Hi George - have you a number on the part ? 105e i would guess and if so , can probably help but will be the weekend before I can check - Steve.
  12. Hi there - did you get sorted on one of these ? if its the lamp body , which is handed , that you want I have one . Can post direct or to Essex . Steve
  13. mk2sav

    Koln Axle for 1600

    3.9 for sale on Gumtree too ,in Scotland tho .!!
  14. mk2sav

    125E Conrod

    Has anybody got an odd 125E , Lotus conrod for sale so I can make up a set . Steve.
  15. Hi again Paul -£15 incl post ? Steve.
  16. Ok Paul - not sure if this is a good thing or no advantage to be had but I have 7 of these - Steve.
  17. Was the length issue that stopped me answering as I have some that I think are correct and now i know how long they should be , I can check at the weekend if you have no luck inbetween times - Steve.
  18. Ok Daz - did you get the sealed beams you were looking for ? 2 new boxed Motorcraft ones here if you still looking .Steve.
  19. Hi Malc - think I can help you there if they are the same as the earlier cars . PM me your phone number if you like . Steve (Totnes)
  20. still got enough for any BSC users !!
  21. + one -definitely what Mitch said !!
  22. Like most , been sorting stuff for Monmouth and will be taking several near complete sets ( only missing the drivers door long trim ) . So that is the 3 other long ones (all for a 4 door car ) and the 4 uprights , all new and lovely . These are up at £75 for a set of 7 if you understand me . Also have the specific ones for estate back doors and the rear window surrounds £10 each for singles and £50 for a pair of rear/ side window trims . Pm or answer on here if you want any - Steve.
  23. Hi Conrad - seeing some of your stuff is from abroad , do you have a good laminated screen for a series 2 ? Steve.
  24. mk2sav

    Fuel Tank Sender

    Not sure if its relavent to you , but there is 2 different fittings for Cortinas . Early cars have the seperate locking ring and later ones , the whole unit turns into the tank . Think Corsairs usually had the latter type . Steve
×
×
  • Create New...