Davem

Thanks for looking, really appreciated. A shame it's the wrong bit, but I'm sure one will turn up soon.

Thank you

I have somehow lost the body side trim part that fits on the fuel flap. Has anyone got a spare they want to sell? Thanks

The join is about 2/3rds down from the roof. The bottom 6 inches are the new rear quarter fitted. As you can see I haven't yet corrected the shape to match the rest of the car.

Hope this shows the difference

I fitted a later rear quarter and the profile is different to the aperture on my June '72 car which has the early wide rubber and chrome cover. I'll try and get a photo later.

Must be the extra roof light Pete

They haven't got any. Mines been on backorder for nearly 2 months

That cup is the same as the one in my 72 GXL, No slots in it.

Has anyone got a spare PFL clip for sale? Preferably down South but willing to travel reasonable distance. It can be bare - I don't need all the suspension parts on it. Thanks

How about this http://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5574629005&toolid=10001&campid=5335900709&customid=&mpre=http://www.ebay.co.uk/itm/ford-cortina-mk3-shell-spares-or-repairs-panels-banger-racing-/182347084027?hash=item2a74bbb0fb:g:QqUAAOSwKOJYIaAC

Exactly how I did mine

Just replied Brian through messenger. Yes it was a good fit and was the correct length from the front chassis joint to the rear joint just before the spring hanger where it splits in 2.

Brian, this is the one I used. It was a good fit. http://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&pub=5574629005&toolid=10001&campid=5335900709&customid=&mpre=http://www.ebay.co.uk/itm/CORTINA-MK3-4-5-1970-1982-CENTRE-CHASSIS-SECTION-R-H-DRIVERS-SIDE-/351501838637?hash=item51d724692d:g:zQgAAOSwv0tVYGXf

Looking for a Mk3 o/s rear quarter panel. Don't mind if it's cut off a car and needs some work. Just found out mine is constructed with about 1/2" of filler and rust!