smudger
-
Content Count
63 -
Joined
-
Last visited
Everything posted by smudger
-
The front is lowered with cut down springs. Wired into the cups to keep the mot man happy Sent from my iPhone using Tapatalk
-
Mine is about 4 inches lower than standard. Lowered with decambered leaf springs You can't go much lower without serious mods to the chassis. Eg the prop shaft will start making contact with the tunnel Sent from my iPhone using Tapatalk
-
Cheers! Sent from my iPhone using Tapatalk
-
Pics taken yesterday during a drive around erith Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
-
Yes you can Sent from my iPhone using Tapatalk
-
I would say not repairable. Cracks can be stitch welded. But this looks way beyond that.... Sent from my iPhone using Tapatalk
-
So had the MOT today.... Failed! Thankfully all small things Nearside indicator decided to pack up on the way! Headlamps were wired up so that dip beam was high beam! Not sure how I managed that!!? And one of the top mounts bearings was seized up and clonking Sent from my iPhone using Tapatalk
-
I thought that they were pre engaged starters on the mk5? If it is a inertia they are easy to Recondition with new brushes - available on eBay for less than a tenner Sent from my iPhone using Tapatalk
-
Lol! Sent from my iPhone using Tapatalk
-
Not mot'd yet... It's ready...But 1-2 more weeks until I can find time to take it to the mot garage! Sent from my iPhone using Tapatalk
-
I think with the smaller holes you just use the metal clips. The bigger holes use the plastic clips Sent from my iPhone using Tapatalk
-
Water pump, head gasket, or cracked head. Water doesn't always find it's way into the oil. Sometimes it's sucked into the combustion chamber and comes out of the exhaust as water vapour. Sent from my iPhone using Tapatalk
-
How much for the air cleaners please? Sent from my iPhone using Tapatalk
-
Yes it was. And in the end I had to replace the whole gutters both sides. Quite tricky repair because it is triple layers at the gutter Sent from my iPhone using Tapatalk
-
Ditto my estate. Sent from my iPhone using Tapatalk
-
wheels are cosmic mk1. 5 1/2 x 13 with 185 70 rear tyres and 155 55 fronts for a subtle hot rod look. 1600 crossflow power. Which is not modified. Low and slow!! Sent from my iPhone using Tapatalk
-
Thanks to all the guys on here who have helped me with parts for this build!! Sent from my iPhone using Tapatalk
-
Yes cosmic mk1. Very rare wheels I think? Sent from my iPhone using Tapatalk
-
Almost finished..... Sent from my iPhone using Tapatalk
-
All crossflow the same. If buying a new one beware that some have metric thread for the 4 pulley bolts Sent from my iPhone using Tapatalk
-
Hi sounds good. How much do you want for them? Sent from my iPhone using Tapatalk
-
Hi Has anybody got a door card for a four door car.? Drivers door In red please. Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
