Hi All,
I'm looking for some advice on ignition coil "+" and "-" terminal connectors.
With the coil I currently have fitted, the connectors are a bit of a sloppy fit... So I have distorted them slightly to allow them to make better contact:
On the new coil I have, the terminals are smaller still!
Had a Google to see if any adapters exist, but to no avail... Now I could snip the old connectors off and replace them with ring crimps, then fasten on with nuts... Just seems a shame to remove the original connectors.
Would like to hear what others do in this situation.
Cheers,
Tom