HELP WANTED MK3 FRONT JACKING POINT

[TIB3300 455]

help wanted of a picture of the front sill jacking point its a strange piece with a foot a bit like the rear but bigger. i would love it if somone had any for sale but as these are welded to the car not likley:drool:

thanks for any help

[FKLGLS 44]

help wanted of a picture of the front sill jacking point its a strange piece with a foot a bit like the rear but bigger. i would love it if somone had any for sale but as these are welded to the car not likley:drool:

thanks for any help

Hi and welcome. :winner: There are some for sale here;

 

http://www.oldpanels.com/Spares.asp

[TIB3300 455]

help wanted of a picture of the front sill jacking point its a strange piece with a foot a bit like the rear but bigger. i would love it if somone had any for sale but as these are welded to the car not likley:drool:

thanks for any help

Hi and welcome. :D There are some for sale here;

 

http://www.oldpanels.com/Spares.asp

cheers for that i will try them this week .but i think the jacking point that thay advertise it a flat a pannel with a small piece at the bottom but !! thay also do rear wheel arch repair pannels that i am after :winner:

[sheffieldcortinacentre 767]

think i've a pattern one somewhere, to be honest i allways plate over them as won't use them would rather jack under cradle or axle.

[MrMacca 4]

Tony's asked me to up this picture for him. :D

 

[TIB3300 455]

Tony's asked me to up this picture for him. :ph34r:

 

I havent found how to get pictures on to here yet so asked mr macca to put this on for me :D

 

This is the piece that i am looking for it goes at the front end of the sill. at the bottom of the A pannel this is the n/s

has anyone seen one for sale or have a pair i can cut off a breaker :cheers: i need both sides

[Thin Lizzy 0]

its best to get rid of all jacking points, they are reust traps. i thought my mk3 was solid because the jacking points were solid. when i took the carpet up the floor had rotted through inside the jacking point. i could still ack the car up on it, but i cut them out and plated them over as they just trapped water and were full of flakey rust and crap.

[Cyrix 0]

Just make up a plate to cover where its been.

 

You wouldnt actually jack the car up from this point, certainly not with the standard jack?

[TIB3300 455]

Just make up a plate to cover where its been.

 

You wouldnt actually jack the car up from this point, certainly not with the standard jack?

sorry lads but am a bit anal when it comes to restoring a car:wacko: i try and do it to as original as poss.

but thanks anyway

[sheffieldcortinacentre 767]

don't think anyone did that part (its the other bit i might have) you'll prob have to make'em.

[TIB3300 455]

don't think anyone did that part (its the other bit i might have) you'll prob have to make'em.

STILL NEED HELP WITH THIS :cheers:

[TIB3300 455]

don't think anyone did that part (its the other bit i might have) you'll prob have to make'em.

STILL NEED HELP WITH THIS :rolleyes: