t.onyb 5 Posted May 4, 2020 Hello, Has anyone got the hazard and heated rear screen switches with the connectors for a preface lift MK3 Cprtina? i have 2 pair of switches but can’t get the cable connections. Happy for just the connectors on any pair or a complete set if you have them. Thanks Quote Share this post Link to post Share on other sites
Steve Walton 128 Posted May 4, 2020 Hi Tony, I have a pair of swiches with the Round Pins same as the one at the bottom of your lower picture. Cheers Steve Quote Share this post Link to post Share on other sites
t.onyb 5 Posted May 4, 2020 Hi Steve, Thanks for getting back to me. Do you have the connector plug for these? Quote Share this post Link to post Share on other sites
Steve Walton 128 Posted May 4, 2020 No sorry Tony just the switches. Quote Share this post Link to post Share on other sites
sheffieldcortinacentre 529 Posted May 4, 2020 The top ones with spade terminals are very late Mk5,MK3 escort. By the other pair are MK3 facelift onwards. MK3 preface lift are completely different & unique. The hazards are very hard to find,hrw bit easier. Will check but think I've a full hazard set up but only a hrw swt. Quote Share this post Link to post Share on other sites
t.onyb 5 Posted May 5, 2020 Thanks Craig, Would appreciate that. Quote Share this post Link to post Share on other sites
sheffieldcortinacentre 529 Posted May 5, 2020 These are the preface lift ones the hazards is complete ( will have a relay somewhere it's just STD 3 pin) it all plugs into original loom, but as I thought I've only got a new switch Quote Share this post Link to post Share on other sites
t.onyb 5 Posted May 5, 2020 Thanks Craig, Mine is a facelift, I’ve had a chap come back to me who thinks he has the correct switches with connectors. Thank you sir. Quote Share this post Link to post Share on other sites
sheffieldcortinacentre 529 Posted May 5, 2020 (edited) Ah you said preface lift at top. I've loads of facelift switches will check on loom parts. Edited May 5, 2020 by sheffieldcortinacentre Quote Share this post Link to post Share on other sites
sheffieldcortinacentre 529 Posted May 6, 2020 No luck on loom parts as there part of loom I think I might have found the wire that runs from front to rear for the. Quote Share this post Link to post Share on other sites