drutin 10 Posted June 18, 2020 doh, my Mk1, Cortina help thread :D i know a silly question, havent touched imperial for 17 years, so i have no clue now i bought a diff housing and axles, no diff grrrr lol well lucky i got it really i suppose :) there are no bolts to hold the brake backing plate and axle to diff housing i need x4 per side, but what ? not really wanting to carry the diff housing into the local nuts and bolts shop and start checking etc lol bolt size ? do i need spring washers ? flat washers ? as i have no memory of what went there also i dont have a parts book or workshop manual etc (next on the list lol) any help much appreciated thanks glen w Quote Share this post Link to post Share on other sites
drutin 10 Posted June 20, 2020 anyone ? someone must know ? thanks Quote Share this post Link to post Share on other sites
Lotuscops 73 Posted June 20, 2020 2 hours ago, drutin said: anyone ? someone must know ? thanks Bolts are 113699-ES 0.5" AF heads 24 TPI 0.8" long 1 Quote Share this post Link to post Share on other sites
drutin 10 Posted June 20, 2020 hey lotuscops, many thanks :D and for the parts diagram :D much appreciated :D ill see if ford still have them lol thanks glen Quote Share this post Link to post Share on other sites
Lotuscops 73 Posted June 20, 2020 1 hour ago, drutin said: hey lotuscops, many thanks :D and for the parts diagram :D much appreciated :D ill see if ford still have them lol thanks glen 1 Quote Share this post Link to post Share on other sites
drutin 10 Posted June 27, 2020 (edited) Next ..... Does a MK1 cortina gearbox bolt straight to a 2.0 litre pinto, escort, cortina engine ? Then what do I need to make it work ? MK1 cortina, flywheel Does this bolt straight to 2.0 litre engine ? MK1 cortina, clutch, clutch plate, pressure plate, release bearing MK1 cortina clutch slave cylinder Mk1 cortina, starter motor Anything else ? Who actually knows or has actually done it ? Thanks Edited June 27, 2020 by drutin Quote Share this post Link to post Share on other sites
drutin 10 Posted June 28, 2020 (edited) So bought a driveshaft, one piece :D Hope it's for a MK1 cortina How do I measure tell ? Help Thanks Edited June 28, 2020 by drutin Quote Share this post Link to post Share on other sites
Lotuscops 73 Posted June 28, 2020 Mine's 22" from end of splines to inner face of the bearing, Quote Share this post Link to post Share on other sites
drutin 10 Posted June 28, 2020 (edited) Thanks lotuscops What would be the measurement from center of universal joint to other end center of universal joint Also, driveshaft tube diameter Diff flange round outside diameter and PCD bolt pattern as i do not have a diff head yet :( whilst im at it :D also the step on the flange, outside diameter too :D ie where it goes into the diff head flange to locate and center it etc Thanks Glen w Edited June 28, 2020 by drutin Quote Share this post Link to post Share on other sites
Lotuscops 73 Posted June 28, 2020 4 hours ago, drutin said: Thanks lotuscops What would be the measurement from center of CV joint to other end center of CV joint Also, driveshaft tube diameter Diff flange round outer diameter and PCD bolt pattern Thanks Glen w What CV joint? PCD is 108 Quote Share this post Link to post Share on other sites
DHV571D 16 Posted June 28, 2020 3 minutes ago, Lotuscops said: What CV joint? PCD is 108 I'm guessing he has a split prop and is measuring between centre and other end U/J's? I also think he wants diff flange diameter and PCD of the bolt holes? Quote Share this post Link to post Share on other sites
drutin 10 Posted June 28, 2020 (edited) universal joint ? doh not sure what yous call them in uk as yous call driveshafts, propshafts :P its not a boat :P its a car lol :D ha ha the joint that joins the shaft and flange to the driveshaft pipe etc its a one piece driveshaft :D Edited June 28, 2020 by drutin Quote Share this post Link to post Share on other sites
Lotuscops 73 Posted June 28, 2020 (edited) 3 minutes ago, drutin said: universal joint ? doh not sure what yous call thm in uk the joint the joins the shaft and flange to the driveshaft pipe etc its a one piece driveshaft :D Prop shaft - UJ - Diff - Flange - lucky we all speak English? Edited June 28, 2020 by Lotuscops 1 Quote Share this post Link to post Share on other sites
drutin 10 Posted June 28, 2020 2 hours ago, Lotuscops said: What CV joint? PCD is 108 universal joint ? pcd of the diff flange, not wheel :D thanks :D Quote Share this post Link to post Share on other sites