Brrrrm83 0 Posted May 28, 2022 I’m reassembling a mk1 preairflo after 16 years. My brake pedal is sitting higher than my clutch pedal by about 3/4”. The pushrods are of different lengths. Is this normal or is it possible I have the pushrods in the wrong cylinders. Thanks. Quote Share this post Link to post Share on other sites
AndrewGT 2 Posted May 28, 2022 Having just done an airflow, the rods are different as the pivot points on the pedal are in different places. From memory the clutch pushrod was the longest. Quote Share this post Link to post Share on other sites
