markymarkthree 178 Posted March 27 1 hour ago, Stuwindsurf said: So just been having a good look and noticed another Major problem, so I set the tracking up with the car on the floor, weight on the wheels and got it more or less spot on. I have just raised it up on the lift and with the suspension relaxed, ie wheels hanging, the wheels toe in drastically. Rear measurement between the rims 47.25" and front measurement between the rims 45.75". So that means the wheels are toeing in 1.5" as the suspension drops!! There has to be something not right. What wcould cause the wheels to toe in that amount as the suspension drops?.... Are the top wishbones handed? Maybe I have them on the wrong sides if so?? Wishbones upper and lower are not handed. However, whenever i strip a subframe down i always put the arms back on side that they came off of. As i feel that's the side they have happily been on for 40/50 ish years. Quote Share this post Link to post Share on other sites
Stuwindsurf 4 Posted March 27 I didn't think they were, but something is wrong for the wheels to toe in and out as the suspension moves up and down Quote Share this post Link to post Share on other sites
