MK1MAD
-
Content Count
38 -
Joined
-
Last visited
Posts posted by MK1MAD
-
-
hi gang looking for a breather pipe with elbow that slides over the engine breather
cheers
-
evening guys and girls totally p$%&"%*&f
question ..damaged my mk1 Cortina flywheel (what a plonker) can I use a Anglia one ?..or better still is there one out there with my name on it ?
cheers gang
-
Hi gang..looking to uprade the tina with a 1500 engine.....in bits or complete cheers
-
that's it all done many thanks for everyone's help :cheers:
-
Maybe a bit thick here but I have two brown yellows together going to D and a green and a brown together going to B and one green and brown going to F
Get that the thick wires join together but what about the thin wire going to F
Cheers
-
big thanks for that
fan belt and alternator fitting in the morning
broom broom
-
evening chaps ..think this might of been on the forum before ?if you can please put on to it great ..if not help is needed converting my mk1 dynamo to alt but what do I do with the wires from the reg box ????
cheers norm
-
Many thanks for you reply
-
hi gang looking for a 1500 engine stripped or complete for my mk1..the engine that's in it is a 1300 pre xflow .can anyone tell me what its worth
cheers
-
afternoon gang.. I'm asking for your help !! looking for a mk1 tina not bothered what model..would like a running project if pos but beggars can't be choosers
cheers norm
-
many thanks peteFirst off they are not as easy to convert as the Volvo Strut tops and if they fail they will be hard and expensive to replace, where as the Volvo ones can only be bought for £40 - £50 + the strut inserts fit the ford strut casing properly.
-
Evening gang converting my 1600e rubber tops to hunter roller tops can anyone help .. I've got the tops what else do I need to make them fit
Cheers
If this topic has been on before could you put me on to it
-
Hi rob please could you send me some pics
Cheers norm
Ps very interested
-
hi were abouts in manchester ?I've got a starter for a mk2 1600e and a radiator for sale.
The radiator may have a leak as it has a rust mark on it.
It is NOT the square to type.
Make me an offer for either of them as I don't know what they are worth.
Collection from Manchester or I am happy to post at cost.
Will try and sort photo's shortly.
.....new phone.....
Jason.
-
What engine and which cam (magnums came in different durations/lift)?
hi sorry for the delay its says M2 285 i was going to put into my crossflow 711
cheers norm 07970241080
-
Brand new still has protective film on and in a plastic cover box is worn sensible offers please will send photo on request
Cheers
-
morning ,could anyone tell me please if my camshaft is a gt the numbers are 711m 6250ba..thanks
-
cheersHave you tried Piper? Looks like they still list them: http://www.pipercams.co.uk/pipercams/www/product_nav.php?type=C&cat=VS&man=8&engine=246
-
evening chaps anyone help !!! looking for a set of double valve springs and caps for my 1600 - 711m kent engine as i'm putting a piper 285 cam in, so need the springs cheers norm
ps if anyone has any ideas of another cam to use please tell :D
-
Morning what about £30.00 all in
Cheers norm
-
brand new pair of track rod ends to fit 1600E/gt.bought and never used,still in sealed greased bags.looking for £30 plus postage[about £5.50]
-
hi all, looking for a set of +40 or 60 pistons for a 1600 rebuild it has a flat head
cheers
-
MY MISTAKE..ITS FOR A SERIES 1.. 1600E
-
evening guys please can anyone help with a 2000e box complete or re-build as my box is goosed,layshaft housing tooth broken. needle bearing housing badly marked...or any help
cheers norm
pre xflow breather pipe with elbow ..
in Wanted
Posted
thanks for your reply mark ..no thanks that is on the block